JG-1000TS Electromechanical Universal Testing Machine 10kN (1Ton)
INTRODUCTION:
Conform To The Standards:
I)Rigid and Reinforced Plastics/Composite:
Technical Specifications:
- JG-1000TS (Touch Screen) electromechanical testing machines offer force, displacement or deformation closed loop testing in tension, compression, flexure, shear, tear and peel etc. The machine can be equipped with a variety of accessories including: grips, fixtures, compression frames, thermal cabinets and extensometers covering all relevant applications as testing of rubber, plastics, foils, films, textiles, adhesives, paper, foods, foams, timber, wires or other metallic or non-metallic specimens and medical, electronic and other components.
Conform To The Standards:
I)Rigid and Reinforced Plastics/Composite:
- EN ISO 6259 - parts 1/2/3 Determination of tensile properties of thermoplastic pipes;
- EN ISO 527-1 - parts 1/2/3 Determination of tensile properties on plastics;
- ASTM D638 Standard Test Method for Tensile Properties of Plastics
- ISO 604 Plastics - determination of compressive properties
- ASTM D695- Plastics -- Standard Test Method for Compressive Properties of Rigid Plastics
- EN ISO 9969 Determination of ring stiffness on thermoplastic pipes;
- ISO 14125 Flexural Properties of Fiber-Reinforced Plastic Composites
- ASTM D3846 Standard Test Method for In-Plane Shear Strength of ReinforcedPlastics;
- EN ISO 13968 Plastics piping and ducting systems -Thermoplastics pipes-Determination of ring flexibility;
- EN ISO 844 Determination of compression properties;
- BS EN ISO 10319 Geotextiles —Wide-width tensile test;
- ASTM D3950 Standard Specification for Strapping, Nonmetallic (and JoiningMethods);
- JBT 8521(EN 1492-2): Textile slings. Safety. Round slings, made of man-made fibers, for general purpose use;
- ASTM D 6775-02 Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material;
- ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials;
- ISO 6892 Metallic materials — Tensile testing — Method of test at ambient temperature;
- BS EN 10002-1Determination of tensile properties on metals;
- BS EN 10002-5: Metallic materials —Part 5: Method of test at elevated temperatures;
- ASTM E21: Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials;
- IS0 783: Metallic materials -Tensile testing at elevated temperature;
- EN ISO 7438 Determination of flexure tests on metals;
- ASTM F606: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets;
- ISO 14589: Blind rivets - Mechanical testing;
- SAE J429: Mechanical and Material Requirements for Externally Threaded Fastener;
Technical Specifications:
| MODEL | JG-1000TS |
| Load Capacity | 10KN (1000Kgf) |
| Calibration Standard | Class 0.5 according to ISO 7500-1 – Meets ASTM E-4 |
| Testing Load Accuracy | ±0.5% |
| Testing Load Range | 0.4%-100%FS |
| Load Resolution | 1/500,000FS |
| Deformation Measuring Range | 0.2%-100%FS |
| Deformation Accuracy | £±0.5% |
| Deformation Resolution | 1/±500000FS of the max deformation |
| Position Accuracy | Within ±0.5% of the value |
| Displacement Resolution | 0.04mm |
| Crosshead Speed Range | 0.00-1000mm/min |
| Crosshead Speed Accuracy | ±0.5% of the set speed |
| Crosshead Travel | 1100mm |
| Max. Tensile Testing Space | 770mm |
| Max. Compression Testing Space | 770mm |
| Test Width | 450mm |
| Compression Platen | Æ100mm |
| Position Limit Switch | Upper and lower lights |
| Power Supply | 0.75KW, AC220V±10%, 50Hz/60Hz |
| Overall Dimensions (L*W*H) | 850x585x1824mm |
| Weight | 420kg |
